• Timber Wolf Bandsaw Blade 93-1-2 1-8 14TPI HP Series-2
  • Timber Wolf Bandsaw Blade 93-1-2 1-8 14TPI HP Series-1

Timber Wolf Bandsaw Blade 93-1/2” 1/8” 14TPI HP Series

SKU #223602
MFR #WS-223602

Timber Wolf blades are made from Swedish silicon steel. Milling the teeth of the blade into a piece of strip steel produces a finished, razor sharp edge without ever having to stamp or grind the teeth. Induction hardening allows for different but more precise hardness throughout the blade. This process provides a perfect balance of superior steel, blade widt…

See Full Description and Specs

$37.99

In stock

Product Highlights

  • Blade. The blade is made from Swedish silicon steel. It is made to cut better and faster, with less wear on bearings, shafts and tires.
  • Teeth. HP (high performance) for detail work these blades have a very thin kerf and 0-degree rake angle and are specifically designed for detail work in 1″ and smaller kiln dried wood when a very clean finish is required The teeth are milled into the steel, not stamped or crush ground, providing a 50% sharper tooth.
  • Low Tension. Timber Wolf blades run under low tension requiring less horsepower while the Swedish silicon steel dissipates heat 3x faster than high carbon steel.
  • Blade Designation. The blade is excellent for scrolling, and very effective in plywood, particleboard and other materials where tear-out is a concern. They can also be used to cut soft metals.

Description

Timber Wolf blades are made from Swedish silicon steel. Milling the teeth of the blade into a piece of strip steel produces a finished, razor sharp edge without ever having to stamp or grind the teeth. Induction hardening allows for different but more precise hardness throughout the blade. This process provides a perfect balance of superior steel, blade width and thickness plus precision set teeth produce a superior cutting blade with exceptional overall life.

Specs

Blade Designation: Scrolling

 

Length: 93-1/2”

Width: 1/8″

TPI (Tooth Per Inch): 14

Tooth Design: HP (high performance)

Blade Thickness: .025

Kerf: .042

Tooth Hook Angle: 0°

Tooth Set Pattern: 5 Raker Set

Radius of Cut: 7/32”

 

Thickness of Work Material to be cut

Kiln Dry Wood: Hardwood 1/8” – 2” Softwood 1/8” – 1-1/4”

Plywood, MDF & other Composites: 1/4” – 1”

Soft Metal & Plastic: 1/4″ – 1/2″

 

Warning:  California Proposition 65

Additional information

  • Weight: 1 lbs
  • Dimensions: 14 × 13 × 1.5 in

You may also like…