Timber Wolf Bandsaw Blade 111 3-8 6TPI PC Series-2
Timber Wolf Bandsaw Blade 111 3-8 6TPI PC Series-1

Timber Wolf Bandsaw Blade 111″ 3/8” 6TPI PC Series

SKU #223760
MFR #WS-223760

Timber Wolf blades are made from Swedish silicon steel. Milling the teeth of the blade into a piece of strip steel produces a finished, razor sharp edge without ever having to stamp or grind the teeth. Induction hardening allows for different but more precise hardness throughout the blade. This process provides a perfect balance of superior steel, blade widt…

See Full Description and Specs

$24.99

Out of stock

Product Highlights

Blade. The blade is made from Swedish silicon steel. It is made to cut better and faster, with less wear on bearings, shafts and tires.

Teeth. The PC (positive claw) Series is excellent for kiln dried wood. The teeth are milled into the steel, not stamped or crush ground, providing a 50% sharper tooth.

Hook Angle and Raker Set. With a Hook Angle of 6.5° and special 5 tooth set pattern, the blade has over 60% of the speed capability of a hook blade while providing the great finish of a skip.

Low Tension. Timber Wolf blades run under low tension requiring less horsepower while the Swedish silicon steel dissipates heat 3x faster than high carbon steel.

Blade Designation. The blade is excellent for curves, template and pattern cutting, ripping and crosscutting.

Description

Timber Wolf blades are made from Swedish silicon steel. Milling the teeth of the blade into a piece of strip steel produces a finished, razor sharp edge without ever having to stamp or grind the teeth. Induction hardening allows for different but more precise hardness throughout the blade. This process provides a perfect balance of superior steel, blade width and thickness plus precision set teeth produce a superior cutting blade with exceptional overall life.

 

Specs

Blade Designation: Curve, Template and Pattern Cutting or Ripping and Crosscutting

 

Length: 111”

Width: 3/8″

TPI (Tooth Per Inch): 6

Tooth Design: PC (positive claw)

 

Warning:  California Proposition 65

Blade Thickness: .025

Kerf: .042

Tooth Hook Angle: 6.5°

Tooth Set Pattern: 5 Raker Set

Radius of Cut: 1-1/4”

 

Thickness of Work Material to be cut

Kiln Dry Wood: Hardwood 3/4″ – 2-1/2” Softwood 1/2” – 1-1/2”

 

Shipping Information

  • Weight: 1 lbs
  • Dimensions: 14 × 13 × 1.5 in

You may also like…