Description
The SawStop® CNS175-SFA30 Contractor Saw offers both safety and versatility. Better-than-hybrid performance in the shop, and stability and mobility on the jobsite. It delivers the performance you need with the peace of mind only the SawStop’s patented safety system can provide.
Specs
Model CNS175-SFA30 | 30” rip capacity & Aluminum Extrusion Fence |
Motor | 1.75 HP |
Saw Body Footprint | 25 3/4" W x 27" D |
Cast Iron Table | 20″ W x 27″ D |
Cast Iron Table (W/ Extension Wings) | 44″ W x 27″ D (w/opt. cast iron wings) |
Extension Wings | 12″ W x 27″ D each |
Extension Table 30 In | N/A |
Shipping Dimensions (Saw Body Only) | 35" W x 30" D x 20" H |
Weights - Table Saw Only | 225 lbs. |
Weights - W/ 30 In Fence Systems | 245 lbs. |
Weights - (Optional Cast Iron Wings) | 35 lbs. each |
Shipping Weight (Approx.) | 240 lbs. (table saw only) |
Blade | 40-tooth, prof. grade, 5/8″ arbor |
Blade Diameter | 10" |
Blade Tilt | Left |
Blade Kerf | 0.118″ (3mm) |
Blade Plate Thickness | 0.078″ (2mm) |
Max. Depth of Cut, Blade At 0º | 3 1/8″ |
Max. Depth of Cut, Blade At 45º | 2 1/4″ |
Max. Rip, Right of Blade - 30 In | 30 1/2″ (w/ 30″ rails) |
Max. Rip, Left of Blade | 16 1/2″ (w/ 30" Std. Fence) |
Max. Rip, Left of Blade (Options) | 12 1/2" (w/ T-Glide Fence) |
Dado Diameter | 8″ (req. dado brake + insert) |
Dado Max. Width | 13/16" |
Arbor Diameter at Blade | 5/8″ |
Main Bearing Size | 62mm OD x 30mm ID |
Second Bearing Size | 52mm OD x 25mm ID |
Table in Front of Blade (Max. Elevation) | 10 5/8" |
Table Behind Blade (Max. Elevation) | 7 1/8″ |
Arbor Runout | 0.001″ Maximum allowable runout |
Table Flatness Measured Diagonally | 0.016″ Maximum gap |
Blade Alignment with Miter Slot | 0.010″ Maximum displacement |
Deviation of Miter Gauge Indexing Stops from Actual | ±0.25º |
Alignment Between Splitter and Blade | 0.010″ Maximum difference |
Miter Slots T-Shaped | 3/4″ at top, 1″ at bottom, 3/8″ deep |
Miter Slots Center | 11 1/8″ center-to-center |
Miter Slots Info | 5 1/2″ (arbor flange to center of right slot) |
Dust Collection Port Diameter | 4″ under tabletop |
Riving Knife / Splitter Thickness | 0.090" (2.3 mm) |
Micro Blade Guard (Standard On 1.75 HP Saws) | polycarbonate, extends 1″ right of blade |
Dust Collection Blade Guard (Standard On 3 HP Saws) (Optional On 1.75 HP Saws) | polycarbonate, extends 1-3/16" right of blade |
Blade Guard (Dust Collection) Port Diameter | 1-1/2" Outside, 1-1/4" Inside |
Insert | zero clearance, phenolic core, melamine surfaces |
Hand Wheels | 6″ diameter, cast alum. w/ ABS handle |
Belts | V-ribbed belt – static dissipative |
Overall Saw Dimensions | 44" W x 39 1/4" D x 34 3/4" H (body only) |
Overall Saw Dimensions 30 In | 58 1/2" W x 40" D x 34 3/4" H |
Motor Configuration | 1.75 HP, 120v, 14 A (user config. to 220v w/optional kit available for purchase) |
Included Items
(2) Steel Extension Wings
(1) Miter Gauge
(1) Micro Blade Guard
(1) Riving Knife
(2) Blade Wrenches
(1) Push Stick
(1) 10” Blade
(1) Standard Brake Cartridge
(1) Owner’s Manual
(1) Assembly Instructions
(2) Hardware Packs
(1) 3mm Hex Key
(1) 5mm Hex Key
(1) 8mm Hex Key
(1) Blade Spacing Adjustment Gauge