• 320017-Veritas Micro-Adjust Wheel Marking Gauge-#05N35.20-1
  • 320017-Veritas Micro-Adjust Wheel Marking Gauge-#05N35.20-2
  • 320017-Veritas Micro-Adjust Wheel Marking Gauge-#05N35.20-3
  • 320017-Veritas Micro-Adjust Wheel Marking Gauge-#05N35.20-4
  • 320017-Veritas Micro-Adjust Wheel Marking Gauge-#05N35.20-5
  • 320017-Veritas Micro-Adjust Wheel Marking Gauge-#05N35.20-6

Veritas Micro-Adjust Wheel Marking Gauge

SKU #320017
MFR #05N35.20

The Veritas Micro-Adjust Wheel Marking Gauge features an anodized aluminum body, brass face, stainless-steel rod and internal O-ring to keep a constant light friction force on the rod. The hardened steel wheel cuts wood fibers rather than tear them, leaving a clean mark, even on cross grain. The 05N35.20 has a rod graduated to 6” in 16ths….

See Full Description and Specs

$55.99

In stock

Product Highlights

  • Anodized Aluminum. Features an anodized aluminum body, brass face, stainless-steel rod and internal O-ring to keep a constant light friction force on the rod.
  • Two-Stage Collet. The two-stage collet allows micro-adjustment of the cutting wheel. The collet has a fine-pitch thread; one revolution advances or retracts the wheel 1/32”, a half turn 1/64”, a quarter turn 1/128”, etc. The knurled thumbscrew locks the setting.
  • Hardened Steel Wheel. The hardened steel wheel cuts the wood fibers rather than tear them, leaving a clean mark, even on cross grain.
  • Single-Sided Bevel. The wheel’s single-sided bevel also forces the gauge face against the stock, maintaining accuracy. The cutting edge of the wheel is at the extreme end of the shaft, which is useful for transferring dimensions such as tenon shoulder or mortise depth.
  • Wheel Storage. The wheel retracts into the face of the gauge for storage.

Description

The Veritas Micro-Adjust Wheel Marking Gauge features an anodized aluminum body, brass face, stainless-steel rod and internal O-ring to keep a constant light friction force on the rod. The hardened steel wheel cuts wood fibers rather than tear them, leaving a clean mark, even on cross grain. The 05N35.20 has a rod graduated to 6” in 16ths.

Specs

Anodized aluminum body, brass face, stainless-steel rod and internal O-ring.

Two-stage collet for micro-adjustment.

Harden steel wheel with single-sided bevel.

Wheel retracts into the face for safe storage.

Additional information

  • Weight: .5 lbs
  • Dimensions: 10.75 × 2.5 × 2.25 in