• 513612 Titebond II Dark Wood Glue 8 Oz 8 Oz 51706

Titebond II Dark Wood Glue 8 Oz

SKU #513612
MFR #51706

Titebond II Dark Wood Glue is a dyed version of Titebond II Wood Glue for use with darker woods. It provides a strong initial tack and fast speed of set to reduce clamp time. It bonds stronger than the wood itself, is easily sanded and unaffected by finishes. Ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Titebond D…

See Full Description and Specs

$5.99

In stock

Product Highlights

  • Water Resistant. It passes ANSI type II water-resistance testing. Use it for projects that may be exposed to moisture. It is not for under water use. It is freeze/thaw stable, paintable, solvent free and non-toxic.
  • Application. The temperature should be above 55°. Open assembly time is 5 minutes (70°F./50%RH). Total assembly time is 10-15 minutes(70°F./50%RH). Allow 24 hours for a full-strength bond.
  • Cleanup. Use a damp cloth while glue is wet. Scrape off and sand dried excess.
  • Interior/Exterior. Designed for interior and exterior applications

Description

Titebond II Dark Wood Glue is a dyed version of Titebond II Wood Glue for use with darker woods. It provides a strong initial tack and fast speed of set to reduce clamp time. It bonds stronger than the wood itself, is easily sanded and unaffected by finishes. Ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Titebond Dark is easy to use, non-toxic and cleans up with water

Specs

Application temperature: Above 55°F
Open assembly time: 5 minutes (70°F./50%RH)
Total assembly time: 10-15 minutes (70°F./50%RH)
Minimum required spread: Approximately 6 mils or 250 square feet per gallon
Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations: Titebond II Dark Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak, please contact our Technical Support Team at 1-800-347-4583. Not FDA approved for indirect food contact. Read MSDS before use. KEEP FROM FREEZING..

Additional information

  • Weight: .7 lbs
  • Dimensions: 7.5 × 3 × 1.5 in