• 551169 Titebond Cold Press Veneer 32 Oz FR5175

Titebond Cold Press Veneer 32 Oz

SKU #551169
MFR #FR5175

Titebond Cold Press for Veneer is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on o…

See Full Description and Specs

$10.69

In stock

Product Highlights

  • Size. 32 oz.
  • Application. The temperature should be above 50°. Open assembly time is 15 minutes (70°F./50%RH). Total assembly time is 15-20 minutes(70°F./50%RH).
  • Economical. Economical alternative to contact cement for large-scale bonding of veneers to flat surfaces.
  • Bleed-Through. Titebond Cold Press is formulated to minimize “bleed-through” on open-grained and unbacked wood veneers.
  • Set Speed. Titebond Cold Press offers a moderate speed of set and a translucent glue line.
  • Vapor Free. Unlike contact cement, there are no harmful vapors. And it’s nonflammable.
  • Uses. Titebond Cold Press is specifically designed for veneering and is not suited for other types of assembly applications. It is not recommended for exterior use or where moisture is likely.

Description

Titebond Cold Press for Veneer is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers. 32 oz. bottle.

Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.

Specs

Application temperature: Above 50°F
Open assembly time: 15 minutes (70°F./50% RH)
Total assembly time: 15-20 minutes (70°F./50%RH)
Minimum required spread: Approximately 6 mils or 250 square feet per gallon
Required pressure application: 100-250 psi, depending on substrates
Method of application: For most consistent coverage a mechanical spreader is recommended.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations: Titebond Cold Press for Veneer is specifically designed for veneering and is not suited for other types of assembly applications. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.

Additional information

  • Weight: 2.6 lbs
  • Dimensions: 10.75 × 3.75 × 3.75 in