Timber Wolf Bandsaw Blade 105 3-4 3TPI TPC Series-2
Timber Wolf Bandsaw Blade 105 3-4 3TPI TPC Series-1

Timber Wolf Bandsaw Blade 105” 3/4” 3TPI PC Series

SKU #223668
MFR #WS-223668

Timber Wolf blades are made from Swedish silicon steel. Milling the teeth of the blade into a piece of strip steel produces a finished, razor sharp edge without ever having to stamp or grind the teeth. Induction hardening allows for different but more precise hardness throughout the blade. This process provides a perfect balance of superior steel, blade widt...

See Full Description and Specs

$43.99

In stock

Product Highlights

  • Blade. The blade is made from Swedish silicon steel. It is made to cut better and faster, with less wear on bearings, shafts and tires.
  • Teeth. The PC (positive claw) Series is excellent for kiln dried wood. The teeth are milled into the steel, not stamped or crush ground, providing a 50% sharper tooth.
  • Low Tension. Timber Wolf blades run under low tension requiring less horsepower while the Swedish silicon steel dissipates heat 3x faster than high carbon steel.
  • Blade Designation. The blade is excellent for curves, template and pattern cutting, ripping and crosscutting.

Description

Timber Wolf blades are made from Swedish silicon steel. Milling the teeth of the blade into a piece of strip steel produces a finished, razor sharp edge without ever having to stamp or grind the teeth. Induction hardening allows for different but more precise hardness throughout the blade. This process provides a perfect balance of superior steel, blade width and thickness plus precision set teeth produce a superior cutting blade with exceptional overall life.

The PC series of blades has over 60% of the speed capabilities that a hook blade is able to travel at, while at the same time giving you the great finish of a skip blade. By incorporating a "hook" style geometry in the gullet, this blade has the ability for fast chip removal. Due to its round design we have eliminated any work hardening zones in the gullet. Couple all this with our unique 6.5 degree rake angle, combined with our special 5 tooth set pattern (which allows us to reduce the set) and we now have a true "thin kerf", awesome cutting blade that gives you an excellent finish.

Specs

Blade Designation: Ripping and Crosscutting

 

Length: 105”

Width: 3/4"

TPI (Tooth Per Inch): 3

Tooth Design: PC (positive claw)

Blade Thickness: .032

Kerf: .048

Tooth Hook Angle: 6.5°

Tooth Set Pattern: 5 Raker Set

Radius of Cut: 5-7/16”

 

Thickness of Work Material to be cut

Kiln Dry Wood: Hardwood 3" - 10" Softwood 3" - 8”

 

Warning:  California Proposition 65

Shipping Information

  • Weight: 1 lbs
  • Dimensions: 14 × 13 × 1.5 in

You may also like…