Rockler Mini Deluxe Panel Clamps_2pk

Product Highlights

• Four-Way Pressure.  Provides four-way pressure that both squeezes the glue joints together and holds the boards flat while the glue cures.
• Equal Pressure. Equal pressure on all sides eliminates the tendency for the panel to bow upward under pressure.
• Sawtooth Rails. Sawtooth rails make it easy to adjust the clamp—just position the tailstock to fit your project.
• Integrated Feet. Integrated feet in rails provide clearance for easier adjustment.
• Steel Rails. Steel rails are 1.8mm thick, with a durable powder-coat finish. Headstock and tailstock assemblies are also powder-coated.
• Min/Max Dimensions. Accepts panels from 1/2'' to 1-1/2'' thick and 5-1/2'' to 16'' wide—great for cutting boards and frame-and-panel door assembly.
• Includes. Includes two Mini Deluxe Panel Clamps, plus a convenient wall rack for hanging the clamps!
• *Note. Two clamps are generally the minimum number needed, and the required number of clamps goes up with the size of your panel. A good guideline is that imaginary 45° lines extending from each clamp face should overlap the 45° lines extending from the neighboring clamp face at least somewhat.
• *Important. To achieve good results, it is critical that the top and bottom pins of the tailstock jaw assembly are positioned in corresponding notches in the top and bottom rails. For example, if the top tailstock pins are in the third slot from the back of the clamp in the top rail, the bottom pins must be in the third slot from the back of the clamp in the bottom rail. This will keep the rails aligned and ensure that pressure is delivered vertically and horizontally at right angles.