• Gripper 1
  • Gripper 2

MicroJig GRR-Ripper Complete

SKU #433135
MFR #GR-281

Work smarter! No table saw, router table or bandsaw should be without one. Superior precision, control and safety are within your grip due to the GRR-RIPPER’s gripping power and ability to affect three directions of force. And with the GRR-RIPPER Complete, you have 250% more stabilizing surface and 54% more gripping area with the Stabilizing Plate and Adju…

See Full Description and Specs

$129.99

In stock

Product Highlights

Safely precise. The Adjustable Center Leg grips the off-cut piece and prevents wood burn. The 1/4″ Leg controls the keeper piece. Balance Support stabilizes small and narrow workpieces. Fully adjustable to allow for a limitless amount of uses.

Moving Blade Guard™. The GRR-RIPPER acts as a Moving-Blade-Guard™ for total hand protection at the table saw, router table, jointer or bandsaw.

Directions of Force. Three directions of force provide superior precision, control and safety. Downward force virtually eliminates kickback. Inward force keeps stock firmly against the fence and forward force controls and feeds both sides of the stock for cleaner cuts.

Green-GRIP. The amazing gripping power is due to Green-Grip, a proprietary non-slip material that provides excellent gripping power over workpieces and materials such as hardwoods, softwoods, plastic and aluminum.

Traction. The treaded grooves add increased traction on the workpiece-even with saw dust. And the treads are easily cleaned with denatured or rubbing alcohol.

Stabilizing Plate. Like a featherboard, the Stabilizing Plate keeps wood locked against the fence for a smooth cut-virtually eliminating binding.

Adjustable Spacer. The Adjustable Spacer gives you 54% more gripping area for controlling larger material.

1/8” Leg. The 1/8” Leg allows you to make rip cuts at thin as 1/8” safely.

Gravity Heel Kit. The Gravity Heel automatically drops to catch the tail end of the work piece providing the leverage needed to push the board safely through the saw.

Handle Bridge Kit. The Handle Bridge Kit’s arch design gives the handle four points of contact to evenly distribute the downward pressure, giving you better control and allows you to angle of the handle for more ergonomic comfort.

Deflector/Connector. Use it a chip deflector to prevent material and wood chips from flying towards you when freehand routing. Or bridge two GRR-RIPPERs together to tackle wider or longer stock. Quickly snap it on the GRR-RIPPER equipped with the Handle Bridge Kit for fast, easy, and safe use. For use with the GRR-RIPPER Handle Bridge Kit.

Description

Work smarter! No table saw, router table or bandsaw should be without one. Superior precision, control and safety are within your grip due to the GRR-RIPPER’s gripping power and ability to affect three directions of force. And with the GRR-RIPPER Complete, you have 250% more stabilizing surface and 54% more gripping area with the Stabilizing Plate and Adjustable Spacer. Also included is a 1/8” side leg, gravity heel kit, handle bridge kit and deflector/connector.

Specs

GR-281 includes:

main body, handle, center leg, 1/8” Leg, 1/4” side leg, 1/2” side leg, balance support, stabilizing plate, adjustable spacer, Gravity Heel Kit, Handle Bridge Kit, Deflector/Connector, hardware, and comprehensive user manual

 

Warning:  California Proposition 65

Additional information

  • Weight: 4 lbs
  • Dimensions: 6.5 × 9 × 8.5 in