Description
Wall Thickness of legs on the Revo 24|36 is 80% heavier compared to the Revo 18|36.
The redesigned banjo features a more compact design, 45° cutout & wider base.
And having a second control panel that mounts in two positions (high or low) sets the Revo 24|36 apart from any other lathe in the world, not only can you turn off the machine from this control panel, but it allows the operator to change speed as well. A switch on the back of the headstock designates whether you control the Revo from the headstock control panel or the corresponding control panel. The E Stop works on both at any given time.
And YES, this amazing control panel comes standard with the Revo 24|36.
Specs
| Motor: | TEFC, 3HP, 8A 220V, 3PH |
| Recommended Breaker: | 15A |
| Remote Control Box w/Speed Settings: | Yes |
| Ergonomic Control Panel Positions: | High/Low |
| Drive Belt: | Ploy-Groove w/EZ Access |
| Tailstock Quill: | 4-1/2”, Engraved, Self-Ejecting |
| Floor to Spindle Center: | 44-1/2” |
| Front Bearing: | TPI Taiwan 6307LLU |
| Rear Bearing: | TPI Taiwan 6205LLU |
| Spindle Index #: | 14/36/48 with Lock |
| Distance Between Centers: | 36” |
| Headstock Through-Bore: | 3/8” |
| Toolrest Post Size: | 1” |
| Spindle Size: | 1-¼″ x 8 TPI RH |
| Floor To Bed: | 32-½″ with Pads |
| Spring Loaded Spindle Lock | |
| Maximum Outboard Turning Diameter: | 38″ (w/ Optional 20″ Extension Installed) |
| Swing Over Banjo: | 19-3/4” |
| Accepts Vacuum Chuck: | Yes |
| Face Plate: | 3″ Diameter |
| Tool Rest: | 12″ |
| Steel Bed: | ASTM A36 |
| Bed Gap: | 50mm |
| Headstock Spindle: | MT2 Taper Hardened To 40° HRC |
| Live Center Threads: | 3/4″ – 10 UNC |
| Tailstock Quill: | #2 MT |
| Swing Over Bed: | 24” |
| RPM High: | 135-3500 |
| RPM Low: | 50-1300 |
| Dimensions (W x D x H): | 60” x 26” x52-1/4” |
| Shipping Weight: | 610 lbs |
| Shipping Dimensions (L x W x H): | 36” x40” x 50” |
