Description
The first feature that will catch your attention is undoubtedly the ergonomic angled control panel made from anodized aluminum. The blue hue of the DRO along with the beautiful knurled control knob fitted with a rubber grip signals this is no ordinary lathe. The bed is made from steel, allowing the cast iron headstock to travel incredibly smoothly. Steel is the preferred material due to its well-known longevity & strength. Electronic variable speed is obtained via a VFD that converts 1 phase input to 3 phase output, so even at low settings, you will get an incredible amount of torque. The DRO gives you an accurate RPM readout whenever any fine adjustments are made electronically. Changing from high to low settings is made easy by using the quick release handle. The headstock & tailstock lock handles are situated on the back to eliminate any interruptions to your workflow. Ergonomically designed handles use a cam lock resulting in a firm feel with no deflection.
Specs
| Electrical: | 2HP, 220 Volt, 60 hz |
| Motor: | Induction, 1725 RPM, TEFC |
| Phase: | 1 Phase Input, 3 Phase Output |
| Recommended Breaker: | 15A |
| Spring-Loaded Spindle Lock | |
| Drive Belt: | Ploy-Groove w/EZ Access |
| Tailstock Quill: | #2 MT |
| Floor to Spindle Center: | 41-1/2” |
| Front Bearing: | TPI Taiwan 6307LLU |
| Rear Bearing: | TPI Taiwan 6205LLU |
| Spindle Index #: | 14/36/48 with Lock |
| Distance Between Centers: | 36” |
| Headstock Through-Bore: | 3/8” |
| Toolrest Post Size: | 1” |
| Spindle Size: | 1-¼″ x 8 TPI RH |
| Floor To Bed: | 32-½″ with Pads |
| Maximum Outboard Swing: | 32″ (w/ Optional 20″ Extension Kit Installed) |
| Swing Over Banjo: | 13-1/2” |
| Accepts Vacuum Chuck: | Yes |
| Steel Bed: | ASTM A36 |
| Bed Gap: | 50mm |
| Live Center Threads: | 3/4″ – 10 UNC |
| Tailstock Quill: | #2 MT |
| Swing Over Bed: | 18” |
| RPM High: | 135-3500 |
| RPM Low: | 50-1300 |
| Dimensions (W x D x H): | 60” x 26” x47” |
| Shipping Weight: | 570 lbs |
| Shipping Dimensions (L x W x H): | 61” x27” x 28” |
