• Kreg Rip-Cut Sled KMA2685
  • Kreg Rip-Cut Sled KMA2685
  • Kreg Rip-Cut Sled KMA2685
  • Kreg Rip-Cut Sled KMA2685
  • Kreg Rip-Cut Sled KMA2685
  • Kreg Rip-Cut Sled KMA2685
  • Kreg Rip-Cut Sled KMA2685

Kreg Rip-Cut Sled

SKU #618101
MFR #KMA2685

The Kreg Rip-Cut™ turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut™, you can cut with the confidence you want and the precision you need….

See Full Description and Specs

$39.99

In stock

Product Highlights

  • Rip and Cross Cuts.  After a simple one-time calibration, you can lock in your cut width (up to 24″) using the measuring scale and precision cursor letting you rip or crosscut.
  • Repeatable Cuts.  The Rip-Cut™ easily makes straight, accurate, repeatable cuts without having to re-measure, re-mark, or having to keep the saw on the cut line.
  • Precise Control.  The Rip-Cut™ provides this precision control with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you must do is lock the saw in at the measurement you want and then make your cut.
  • No Marking Needed.  With a built-in measuring scale, you do not have to measure and mark each cut just lock the saw sled at your desired cut width, and you are all set.
  • Take Your Saw to The Material.  Instead of having to take your material to the saw take your saw to the material and avoid having to feed large awkward sheets through your table saw.
  • Universal Sled.  Simply mount your saw to the universal sled that accepts most left-blade or right-blade saws and then slide the sled onto the aluminum rail.
  • Reversible Edge Guide.  This allows you to position the Rip-Cut Sled for left- or right-handed use.

Description

The Kreg Rip-Cut™ turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut™, you can cut with the confidence you want and the precision you need.

Specs

Aluminum Rail 3″ (76.2mm) wide x 30″ (762mm) long
Materials High-quality aluminum and impact-resistant plastic polymer
Saw Sled Accepts left- and right-blade saws, built-in indexing stop and precision cursor
Cut Width Maximum 24″ (610mm)
Includes: (1) Universal Saw Sled, (1) Aluminum Guide Rail, (1) Precision Edge Guide, Detailed Setup and Usage Instructions

Warning:  California Proposition 65

Shipping Information

  • Weight: 2.5 lbs
  • Dimensions: 40 × 9 × 3 in

You may also like…