• Kreg Right Angle Clamp Automaxx® 00
  • Kreg Right Angle Clamp Automaxx® 01

Kreg Right-Angle Clamp Automaxx®

SKU #415622
MFR #KHCRA

The Right Angle Clamp makes projects with 90° joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive in the screws. Just slip the pin on the Right Angle Clamp into a pocket hole, close the clamp, and it draws the mating pieces tightly together. The swiveling clamp pad opposite the pin grabs the …

See Full Description and Specs

$39.99

In stock

Product Highlights

  • Clamping. The steel pin on this clamp is shaped to fit snugly into a pocket hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw into an adjacent pocket hole while the Right Angle Clamp holds the piece steady for you.6″ reach (152mm); clamps materials up to 5″ thick (127mm).
  • Automaxx®. Thanks to Automaxx® Auto-Adjust Technology, Wood Project Clamps adjust to match material thickness automatically with a simple squeeze of handles — whether the material is thick, thin, or in between. You can clamp a 2×4 and then a piece of 1/2″ plywood without ever readjusting the clamp.
  • Swivel Pad. The arm opposite the pin features a pad that swivels to fit tight against your material, so you can count on solid clamping without a chance of the joint shifting.
  • Ultra-Wide Reach. Whether you’re joining two thin drawer sides for a cabinet, or thicker materials to frame an outdoor project, the Right Angle Clamp opens wide to get the job done.
  • Padded Grips. Ergonomic padded grips prevent hand fatigue.
  • One Clamp or Two. Many woodworkers find it handy to use two Right Angle Clamps when assembling large workpieces. Place a clamp on each end to hold the workpiece while you drive screws in the remaining pocket holes.

Description

The Right Angle Clamp makes projects with 90° joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive in the screws. Just slip the pin on the Right Angle Clamp into a pocket hole, close the clamp, and it draws the mating pieces tightly together. The swiveling clamp pad opposite the pin grabs the mating piece securely. Thanks to Automaxx® Auto-Adjust Technology, the Right Angle Clamp adjusts to match the material automatically with a simple squeeze of the handles.

Specs

Clamping Capacity: Materials up to 31/8″ (79 mm)

Reach: 5″ (127 mm)

Adjustment Knob: Provides easy-to-regulate clamping pressure

Handles Ergonomic padded grips prevent hand fatigue

Clamp Body Highly durable, all-metal construction

Compatible With Design reaches into pocket holes on the inside or outside of 90° case assemblies

Additional information

  • Weight: 1.75 lbs
  • Dimensions: 15 × 6.5 × 1 in