General Finishes Flat Out Flat

General Finishes Flat Out Flat

SKU #N/A
MFR #WS-GF-Flat-Out-Flat

Flat Out Flat is a self-cross linking water-based topcoat that mimics the lustrous look and feel of wax. The increased matting agents used to create “flat look” cause this wood finish to have less clarity, show fingerprints more and provide slightly less durability than High Performance. It is recommended for low-use projects other than kitchen cabinets an…

See Full Description and Specs

$27.00 – $40.00

Product Highlights

  • Use.  Designed to be used over Milk/Chalk Paint to improve the durability while preserving the color.
  • Finish.  Leaves a lustrous “finishing feel” that woodworkers love.
  • Easy to Apply.  Stain can be applied with brush, roll, or spray.
  • Environment.  Designed for interior use only.
  • Easy Cleanup.  Cleanup excess finish using warm soapy water.

 

Warning: Do not use water-based products with Linseed Oils or Danish Oils.

CAUTION: Do NOT use GF Flat Out Flat or any other clear coat, over white or light paints such as GF Milk Paint, or GF White Poly as it may cause yellowing. Any clear coat can become reactive over wood substrates or existing finishes causing tannin, stain, or dye bleed-through. All of GF’s White Paints, Brushable or spray versions, do NOT require a topcoat.

NOTICE:  Water based products cannot be shipped when the temperature is below freezing.

Instructions Flat-Out-Flat Topcoat

Technical Data Sheet (TDS)

Safety Data Sheet (SDS)

Warning:  California Proposition 65

 

Description

Flat Out Flat is a self-cross linking water-based topcoat that mimics the lustrous look and feel of wax. The increased matting agents used to create “flat look” cause this wood finish to have less clarity, show fingerprints more and provide slightly less durability than High Performance. It is recommended for low-use projects other than kitchen cabinets and tabletops.

Specs

Basic Features
Product Colors Water White in can (dries clear)
Base Type Water
Ambering No
Sheen Very Flat (1-5)
Interior or Exterior Interior only
Type Self-crosslinking Acrylic

 

Application
Coats 3 coats
Application Method Brush, Roll, Spray
Brushable Yes
Usable over existing finishes Yes
Sprayable Yes
Spray Tip Sizes HVLP 1.1mm-1.3mm

 

Dry Time
Dry Time – Touch 30+ min.
Dry Time – Recoat 2+ hr.
Dry Time – Light Use 7-10 days
Dry Time – Cure 21 days

 

Contents
Can Sizes Pints, Quarts, Gallons
Coverage 65-75 sq. ft./pint, 125-150 sq. ft./quart, 500-600 sq. ft./gallon

 

Technical Data
Viscosity Medium
Viscosity (cPs) 350-450
Weight Solids 24%
VOC US VOC
<210.143 g/L

 

Durability
Durability (Highest, High, Medium, Low) Low
Hardness (Koenig #) 89
Wear (Taber #) 50.00 mg loss
Water (5 max) 4
Chemical (105 max) 86

Shipping Information

  • Weight: N/A
  • Dimensions: N/A
  • Size:

    Pint, Quart