• General Finishes Semi-Gloss Arm-R-Seal Oil Based Topcoat
  • General Finishes Semi-Gloss Arm-R-Seal Oil Based Topcoat
  • General Finishes Semi-Gloss Arm-R-Seal Oil Based Topcoat

General Finishes Semi-Gloss Arm-R-Seal Oil Based Topcoat

SKU #N/A
MFR #WS-GF-Arm-R-Seal-Semi-Gloss

Arm-R-Seal Oil-Based Topcoats are made with the highest-quality urethane resin, making them extremely durable and long-lasting. Formulated to be wiped on with a cloth or applied with a foam brush, and they penetrate to provide deep-down protection for that “natural” look….

See Full Description and Specs

$18.29$65.99

Clear

Product Highlights

  • Use.  It provides a warm look while protecting your wooden products.
  • Durable.  Arm-R-Seal topcoats are made with urethane resin they are extremely durable and long lasting.
  • Finishes. Arm-R-Seal Topcoat is available in Satin, Semi-Gloss, and Gloss.
  • Easy to Apply.  Finish can be applied with brush, or roll.
  • Environment.  Designed for interior use only.
  • Cleanup.  Cleanup excess stain using mineral spirits.

Instructions Arm-R-Seal Topcoat

Technical Data Sheet (TDS)

Safety Data Sheet (SDS)

Warning:  California Proposition 65

Description

Arm-R-Seal Oil-Based Topcoats are made with the highest-quality urethane resin, making them extremely durable and long-lasting. Formulated to be wiped on with a cloth or applied with a foam brush, and they penetrate to provide deep-down protection for that “natural” look.

Specs

Basic Features
Product Colors Dries Amber
Base Type Oil
Ambering Yes
Sheen Satin (25-35), Semi-Gloss (50-60), Gloss (80+)
Interior or Exterior Interior only
Type Urethane

 

Application
Coats 3 coats
Application Method Brush, Roll
Brushable Yes
Usable over existing finishes Yes
Sprayable Yes
Spray Tip Sizes HVLP 1.0mm-1.2mm

 

Dry Time
Dry Time – Touch 12+ hr.
Dry Time – Recoat 12-24+ hr. raw wood, 72+ hr. existing finish until non-tacky. (Add more time with subsequent coats.)
Dry Time – Light Use 7-10 days
Dry Time – Cure 30 days

 

Contents
Can Sizes Pints, Quarts, Gallons
Coverage 50-60 sq. ft./pint, 100-125 sq. ft./quart, 400-500 sq. ft./gallon

 

Technical Data
Viscosity Thin
Viscosity (cPs) 100-200
Weight Solids 32%
VOC US VOC
Satin: 576.788 g/L
Semi-Gloss: 576.231 g/L
Gloss: 531.138 g/L

 

Durability
Durability (Highest, High, Medium, Low) Highest
Hardness (Koenig #) 77
Wear (Taber #) 57.10 mg loss
Water (5 max) 5
Chemical (105 max) 99

Shipping Information

  • Weight: N/A
  • Dimensions: N/A
  • Size:

    Pint, Quart, Gallon