Product Highlights

Small Pours. With the ability to cast from 1/4” to 1” thick per layer in pour volumes up to 2L, FlowCast SPR is perfect for small-scale live edge wood projects, and small-scale encapsulations.
No Bubbles. FlowCast SPR’s low viscosity provides excellent air release allowing trapped air to rise to the surface, significantly reducing bubbles in the cured casting.
Liquid Glass. FlowCast SPR cures to a highly desired transparent water-clear appearance. It can also be combined with Liquid and Metallic Color Pigments, and Polyester Color Glitters to create custom hues, tints, shades, and effects.
Low Odor. EcoPoxy FlowCast SPR has an extremely low odor. Less ventilation is required than when using other epoxies.
Creative Uses. FlowCast SPR can be used to create beautiful small-scale live edge wood projects, such as coasters and serving trays.
Milling Tools. FlowCast® can be worked using the same tools you already have for woodworking, giving you thousands of possibilities to create beautiful projects.

Description

FlowCast SPR is a two-component casting epoxy formulated for weekend woodworking projects. When used at one-inch thickness, the maximum volume, and under the recommended conditions, you can expect your projects to demold in 1 day*. Use FlowCast SPR epoxy by itself for a water-clear finish or add our liquid or metallic pigments to create custom colors and effects. FlowCast SPR can be used to create beautiful small-scale live edge wood projects, such as coasters and serving trays. For larger projects (such as river tables) use our deep cast resin, FlowCast.

FlowCast SPR can be worked (trimmed, routed, sanded, and finished) using the same tools you have in your woodshop. With our ever-growing line of EcoPoxy® pigments and accessories, we can support you with everything you need for your small-scale epoxy projects.

Specs

Mix Ratio	2:1 by volume or 2.5:1 by mass
Working Temperature	20-25ºC (68-77ºF)
Working Time Limit	Pour Depth Dependent-1” = 4-5 hrs.; 1/2" = 6-7 Hrs.
Set To Touch	Pour Depth Dependent-1” = 24 hrs.; 1/2" = 32 Hrs.
Demolding Time	1” = 24 hrs.; 1/2” = 40-48 hrs.
Time To Finishing	Immediately after demolding
Full Cure	1” = 3 days; 1/2" = 7 days
Recommended Thickness per Layer	1/4" - 1" per layer in pour volumes up to 2L. Not recommended for pours less than 1/4" depth
Cure Appearance	Crystal Clear
Pigments Can Be Added	Yes
Clean Up	Denatured Alcohol or Warm Soapy Water