Amana Lock Miter 45° x 1/2″ Shank

SKU #272143
MFR #55390

The lock miter is an interlocking edge-to-edge joint, typically used at the corners of casework. Used in a table-mounted router, run at reduced speed, this bit cuts both halves of the joint. The same setup of bit and fence cuts both parts. One part is laid flat on the tabletop and fed across the cutter. The second is braced vertically against the fence and f…

See Full Description and Specs

$89.99

In stock

Product Highlights

  • Angle. 45°.
  • Shank. 1/2″
  • Material Thickness. 1/2″ – 1″
  • Maximum RPM. 18,000
  • Overall Length. 2-5/8″

Description

The lock miter is an interlocking edge-to-edge joint, typically used at the corners of casework. Used in a table-mounted router, run at reduced speed, this bit cuts both halves of the joint. The same setup of bit and fence cuts both parts. One part is laid flat on the tabletop and fed across the cutter. The second is braced vertically against the fence and fed across the cutter. For best results use in a table-mounted router.

Specs

ANGLE 45°
NUMBER OF FLUTES 2
OVERALL DIA. 2-11/16″
OVERALL LENGTH 2-5/8″
SHANK DIA. 1/2″
CUTTING HEIGHT (H) 1-3/16″
MAX RPM 18,000

Warning:  California Proposition 65

Shipping Information

  • Weight: 0.4 lbs
  • Dimensions: 8.5 × 11 × 1 in