Timber Wolf Bandsaw Blade 93-1/2” 3/16” 10TPI RK Series

SKU #223612
MFR #WS-223612

Timber Wolf blades are made from Swedish silicon steel. Milling the teeth of the blade into a piece of strip steel produces a finished, razor sharp edge without ever having to stamp or grind the teeth. Induction hardening allows for different but more precise hardness throughout the blade. This process provides a perfect balance of superior steel, blade widt…

See Full Description and Specs

$19.99

Out of stock

Product Highlights

  • Blade. The blade is made from Swedish silicon steel. It is made to cut better and faster, with less wear on bearings, shafts and tires.
  • Teeth. RK (raker)) for detail work these blades have a very thin kerf and 0-degree rake angle and are specifically designed for detail work in 1″ and smaller kiln dried wood when a very clean finish is required. They are also very effective in plywood, particleboard and other similar products where tear-out is a concern. These blades can also be used to cut soft metals. The teeth are milled into the steel, not stamped or crush ground, providing a 50% sharper tooth.
  • Low Tension. Timber Wolf blades run under low tension requiring less horsepower while the Swedish silicon steel dissipates heat 3x faster than high carbon steel.
  • Blade Designation. This blade is excellent for cutting kiln-dried hardwoods, plywood, MDF and other composites. It can also be used to cut soft metal and plastic.

Description

Timber Wolf blades are made from Swedish silicon steel. Milling the teeth of the blade into a piece of strip steel produces a finished, razor sharp edge without ever having to stamp or grind the teeth. Induction hardening allows for different but more precise hardness throughout the blade. This process provides a perfect balance of superior steel, blade width and thickness plus precision set teeth produce a superior cutting blade with exceptional overall life.

Specs

Blade Designation: Scrolling or

Curve, Template and Pattern Cutting

 

Length: 93-1/2”

Width: 3/16″

TPI (Tooth Per Inch): 10

Tooth Design: HP (high performance)

Blade Thickness: .025

Kerf: .042

Tooth Hook Angle: 0°

Tooth Set Pattern: 5 Raker Set

Radius of Cut: 3/8”

 

Thickness of Work Material to be cut

Kiln Dry Wood: Hardwood 1/4” – 2-1/2” Softwood 1/4” – 1-1/2”

Plywood, MDF & other Composites: 1/4” – 2”

Soft Metal & Plastic: 1/4″ – 1/2″

 

Warning:  California Proposition 65

Shipping Information

  • Weight: 1 lbs
  • Dimensions: 14 × 13 × 1.5 in

You may also like…