• General Finishes Enduro-Var II Satin Quart
  • General Finishes Enduro-Var II Satin Gallon

General Finishes Enduro-Var II Satin

SKU #N/A
MFR #WS-GF-EVII-Satin

Enduro-Var II is a reformulation of General Finishes original oil-modified, ambering, water-based topcoat. It replaces original Endurovar and is made with more than 70% renewable resources and is compatible with ALL GF products. The newer environment-friendly formula dries to a lighter amber than the previous formula, is highly water-resistant, and is bo…

See Full Description and Specs

$45.99$99.99

Clear

Product Highlights

  • Use. Enduro-Var II is an oil/water combination that, like an oil, imparts an amber tone and enhances the figure of wood while providing all the benefits of a water-based finish. It may be brushed or sprayed
  • Tinting and Toning.  Enduro-Var II can be used as a toner by mixing by volume with 5- 10% General Finishes Dye Stain or to enhance color tone. Apply 2 coats of the tinted topcoat for a deeper, more vibrant color.
  • Advantages.  Enduro-Var II is oil modified so it ambers slightly as it dries and is highly water resistant.
  • Application.  Can be applied with a brush, roll. or spray applicator.
  • Environment.  Designed for interior use only.

NOTICE:  Water based products cannot be shipped when the temperature is below freezing.

Instructions General Finishes Enduro-Var

Technical Data Sheet (TDS)

Safety Data Sheet (SDS)

Warning:  California Proposition 65

Description

Enduro-Var II is a reformulation of General Finishes original oil-modified, ambering, water-based topcoat. It replaces original Endurovar and is made with more than 70% renewable resources and is compatible with ALL GF products. The newer environment-friendly formula dries to a lighter amber than the previous formula, is highly water-resistant, and is both sprayable and brushable.

Specs

Basic Features
Product Colors Dries Amber
Base Type Water
Ambering Yes
Sheen Flat (10 or less), Satin (25-35), Semi-Gloss (50-60), Gloss (80+)
Interior or Exterior Interior only
Tintable Yes
Type Oil-modified Urethane

 

Application
Coats 3 coats
Application Method Brush, Roll, Spray
Brushable Yes
Usable over existing finishes No
Sprayable Yes
Spray Tip Sizes HVLP 1.1mm-1.3mm

 

Dry Time
Dry Time – Touch 30+ min.
Dry Time – Recoat 4+ hr
Dry Time – Light Use 7-10 days
Dry Time – Cure 21 days

 

Contents
Can Sizes Quarts , Gallons
Coverage 125-150 sq. ft./quart, 500-600 sq. ft. /gallon

 

Technical Data
Viscosity Thin
Viscosity (cPs) 200-300
Weight Solids 28%
VOC US VOC
All sheens <250 g/L

 

Durability
Durability (Highest, High, Medium, Low) Medium
Hardness (Koenig #) 123
Wear (Taber #) 95.60 mg loss
Water (5 max) 3

Shipping Information

  • Weight: N/A
  • Dimensions: N/A
  • Size:

    Quart, Gallon