• Amana Cove Bit2
  • Amana Cove Bit3
  • Amana Cove Bit4
  • Amana Cove Bit1

Amana Cove Bit 1/4” Rad x 7/8” Dia x 9/16” x 1/4″ Shank

SKU #271773
MFR #49104

The Amana Carbide-Tipped 1/4” Radius Cove bit is one of the classic building blocks for many molding profiles. Use it alone or in combination with beads and fillets. Use the cove to detail the edges of casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables, the other half is the corner-rou…

See Full Description and Specs

$34.99

In stock

Product Highlights

  • Shank. 1/4” Shank.
  • Cutting Radius. 1/4″
  • Cutting Height. 9/16”
  • Best Results. For best results with a large radius cutter, make a preliminary cut with a smaller radius bit or chamfer the workpiece to reduce the amount of stock to be removed in the finish pass. This will produce a smoother finish and prolong tool life. The largest diameter bits must be run at reduced speed. Use in a handheld or table-mounted router.

Description

The Amana Carbide-Tipped 1/4” Radius Cove bit is one of the classic building blocks for many molding profiles. Use it alone or in combination with beads and fillets. Use the cove to detail the edges of casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables, the other half is the corner-round. This is a 1/4″ shank bit.

Specs

Diameter (D) 7/8”
Radius (R) 1/4″
Cutting Height (B) 9/16”
Shank (d) 1/4″
Overall Length (L) 2”
Replacement Bearing 47704
Flutes 2

Additional information

  • Weight: .188 lbs
  • Dimensions: 4.625 × 2 × 1 in